View 74LVX541SJ_1202927.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74LVX541 Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs
September 1999 Revised April 2005
74LVX541 Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs
General Description
The LVX541 is an octal non-inverting buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter or receiver which provides improved PC board density. The inputs tolerate up to 7V allowing interface of 5V systems to 3V systems.
Features
s Input voltage translation from 5V to 3V s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance
Ordering Code:
Order Number 74LVX541M 74LVX541SJ 74LVX541MTC Package Number M20B M20D MTC20 Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Pb-Free package per JEDEC J-STD-020B.
Connection Diagram
Logic Symbol
IEEE/IEC
Pin Descriptions
Pin Names OE1, OE2 I0 - I7 O0 - O7 Descriptions 3-STATE Output Enable Inputs Inputs 3-STATE Outputs
Truth Table
Inputs OE1 L H X L
H HIGH Voltage Level L LOW Voltage Level
OE2 L X H L
Outputs I H X X L H Z Z L
X Immaterial Z High Impedance
(c) 2005 Fairchild Semiconductor Corporation
DS500291
www.fairchildsemi.com
74LVX541
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC) DC Input Diode Current (IIK) VI
0.5V to 7.0V 20 mA 0.5V to 7V 20 mA 20 mA 0.5V to VCC 0.5V r25 mA r75 mA 65qC to 150qC
180 mW
Recommended Operating Conditions (Note 2)
Supply Voltage (VCC) Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) Input Rise and Fall Time ('t/'V) 2.0V to 3.6V 0V to 5.5V 0V to VCC
0.5V
DC Input Voltage (VI) DC Output Diode Current (IOK) VO VO
40qC to 85qC
0 ns/V to 100 ns/V
0.5V VCC 0.5V
DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current (ICC or IGND) Storage Temperature (TSTG) Power Dissipation
Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: Unused inputs must be held HIGH or LOW. They may not float
DC Electrical Characteristics
Symbol VIH Parameter HIGH Level Input Voltage VIL LOW Level Input Voltage VOH HIGH Level Output Voltage VOL LOW Level Output Voltage IOZ IIN ICC 3-STATE Output OFF-State Current Input Leakage Current Quiescent Supply Current VCC 2.0 3.0 3.6 2.0 3.0 3.6 2.0 3.0 3.0 2.0 3.0 3.0 3.6 3.6 3.6 1.9 2.9 2.58 0.0 0.0 0.1 0.1 0.36 2.0 3.0 TA Min 1.5 2.0 2.4 0.5 0.8 0.8 1.9 2.9 2.48 0.1 0.1 0.44 V VIN VIN VOUT VIN VIN V VIN 25qC Typ Max TA
40qC to 85qC
Max 1.5 2.0 2.4 0.5 0.8 0.8
Min
Units
Conditions
V
V IOH VIH or VIL IOH IOH IOL VIH or VIL IOL IOL VIH or VIL VCC or GND 5.5V or GND VCC or GND
50 PA 50 PA 4 mA
50 PA 50 PA 4 mA
r0.25 r0.1
4.0
r2.5 r1.0
40.0
PA PA PA
Noise Characteristics (Note 3)
Symbol VOLP VOLV VIHD VILD Parameter Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Minimum HIGH Level Dynamic Input Voltage Maximum HIGH Level Dynamic Input Voltage
tf 3 ns.
VCC (V) 3.3 3.3 3.3 3.3 Typ 0.5
TA
25qC Limits 0.8
Units V V V V CL CL CL CL
Conditions 50 pF 50 pF 50 pF 50 pF
0.5
0.8
2.0 0.8
Note 3: Input tr
www.fairchildsemi.com
2
74LVX541
AC Electrical Characteristics
Symbol tPLH tPHL Parameter Propagation Delay Time 3.3 r 0.3 tPZL tPZH 3-STATE Output Enable Time 9.6 3.3 r 0.3 6.8 9.3 tPLZ tPHZ tOSLH tOSHL 3-STATE Output Disable Time Output to Output Skew (Note 4) 2.7 3.3 r 0.3 2.7 3.3
|tPLHm tPLHn|; tOSHL |t PHLm t PHLn|.
VCC (V) 2.7 Min
TA
25qC Typ 6.1 8.6 4.7 7.2 7.1 Max 11.3 14.9 7.0 10.5 13.8 17.3 10.5 14.0 17.9 15.4 1.5 1.5
TA
40qC to 85qC
Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max 13.5 17.0 8.5 12.0 16.5 20.0 12.5 16.0 20.0 17.5 1.5 1.5
Units CL ns CL CL CL CL RL CL ns RL CL RL CL RL CL RL CL
Conditions 15 pF 50 pF 15 pF 50 pF 15 pF 1 k: 50 pF 1 k: 15 pF 1 k: 50 pF 1 k: 50 pF 1 k: 50 pF
2.7
11.6 10.7
ns ns
Note 4: Parameter guaranteed by design. tOSLH
Capacitance
Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance (Note 5) Parameter TA Min
25qC
Typ 4 6 19 Max 10
TA
40qC to 85qC
Max 10
Min
Units pF pF pF
Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
Average operating current can be obtained by the equation: ICC(opr.)
CPD x VCC x fIN ICC 8 (per bit)
3
www.fairchildsemi.com
74LVX541
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B
www.fairchildsemi.com
4
74LVX541
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D
5
www.fairchildsemi.com
74LVX541 Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 6 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com

▲Up To Search▲

Price & Availability of 74LVX541SJ

	To Download 74LVX541SJ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .